SPECIFICATIONS

Brand Name: DIVEDEER

Choice: yes

High-concerned chemical: none

Origin: Mainland China

Voltage: 220 V

Note:

1. All our models require a power cord to operate. The machine will not function if the power cord is disconnected.

2. Our window cleaners come in two styles: the first features the “DIVEDEER” brand logo, while the second does not. Models will be shipped randomly. If you cannot accept this, please do not place an order.

3.All products are equipped with brushed motors and operate at 65 dB. They will produce noise; please purchase only if you are comfortable with this. If you cannot tolerate the noise, please do not purchase.

4. The unit ships without remote control batteries. Buyers must purchase batteries separately for operation.

5. The remote control lights on all our models do not illuminate. You can use the remote without the lights on; the machine will clean according to the commands you enter. (Note: Do not instruct the machine to perform the next action before the current one is complete. Doing so may cause the machine to spin in place or remain stationary. In this case, press the remote control and use the up, down, left, and right buttons to resume normal operation.)

6. This device features two modes: Auto Mode and Manual Mode. (When the device lights up and the remote control becomes unresponsive, it enters Auto Cleaning Mode. To switch to Manual Mode, turn off the device, wait 1-2 minutes, then restart. After powering on, press and hold the power button to switch modes.)

7.If there is edge tape on the customer’s window, please do not allow the machine to run over the edge tape. If the machine runs over the edge tape, the machine will lose suction, causing it to fall directly to the ground. Therefore, customers with edge sealant who wish to purchase our product must be careful to manually avoid the edge sealant using the remote control when the machine approaches it. When the machine passes over the edge sealant, manually wipe the area with a cloth. Customers placing orders must pay close attention to this, because if you do not follow these instructions, the machine will fall directly to the ground and be damaged.